Moteur de pompe Astralpool Xtreme 3 PPE pour robots de piscine Xtreme 2 et Xtreme 3 - S1A6011

Astralpool Xtreme 3 PPE pump motor for Xtreme 2 and Xtreme 3 pool robots

This is the genuine Astralpool PPE pump motor — the dedicated water-pumping unit responsible for generating suction and driving debris-laden water through the filtration bag in the Xtreme robot cleaner. Distinct from the traction drive motor, it is the hydraulic heart of the machine: without it, the robot moves but filters nothing. It is a direct OEM replacement sourced from Astralpool’s own supply chain.

Fonction et rôle au sein du robot

The PPE motor creates the negative pressure that draws pool water, sediment, algae particles and fine debris up through the robot’s inlet and into the filter bag. When this motor degrades, suction output drops noticeably, filtration efficiency falls off and the robot may complete a cleaning cycle while leaving the pool visibly dirty. Replacing the PPE motor restores the unit to factory suction performance.

Modèles compatibles

This motor is specified for the Astralpool Xtreme 2 (model reference 49798) and Xtreme 3 (model reference 49799) robotic pool cleaners. It corresponds to item number 45 on the Xtreme 2 exploded-view diagram and item number 46 on the Xtreme 3 diagram. Always cross-reference your robot’s model number before ordering.

Symptoms that indicate the PPE motor needs replacing

Key failure signs include a marked loss of suction despite a clean filter bag, unusual humming or grinding noise from the pump compartment during a cycle, the robot completing its programme but leaving debris on the pool floor, and water flow noticeably weaker at the robot’s outlet. Intermittent operation — where the robot cuts out mid-cycle and restarts — can also point to a failing PPE motor winding.

Pourquoi l'authenticité est importante

An OEM Astralpool PPE motor is wound, sealed and rated specifically for continuous submersed operation in chlorinated and saline pool water. Aftermarket alternatives frequently use inferior winding wire gauges and substandard shaft seals, leading to premature failure and potential water ingress into the motor housing. Fitting a genuine part protects the integrity of the wider drivetrain and keeps any remaining warranty valid.