Astralpool - Filter Manifold Assembly 900 1" - CE04300812

Astralpool – Filter Manifold Assembly 900 1″

This is the genuine Astralpool manifold assembly for the HS900/T Screws Cover Top 1018 sand filter. The manifold sits at the base of the filter tank and is responsible for evenly distributing water through the filter media during filtration and collecting it efficiently during backwash cycles. It is the original Fluidra-sourced component listed at position 10 in the official exploded-view diagram for this filter model.

Compatibilité

This manifold assembly is designed exclusively for the Astralpool Screws Cover Top 1018 Filter in the HS900/T configuration. Always cross-reference the model designation and the exploded-view position (position 10) before ordering to ensure a correct fit. It is not interchangeable with manifold assemblies from other Astralpool filter series or sizes.

Pourquoi l'authenticité est importante

An original Astralpool manifold assembly guarantees precise dimensional tolerances, material quality, and lateral arm spacing to match the HS900/T tank geometry. Aftermarket alternatives may not seal correctly or distribute flow evenly, leading to channelling through the filter bed, poor water quality, and potential damage to the tank. Using a genuine part also preserves any remaining manufacturer warranty on the filter.

Installation

Replacement of the manifold assembly involves draining the filter tank, removing the filter media, and unthreading or unclipping the existing manifold from the standpipe or base fitting. The 1-inch connection size should be verified against existing pipework before installation. Professional fitting by a qualified pool technician is recommended to ensure correct torque, alignment, and leak-free reassembly.

Cette pièce n'est actuellement pas disponible à la commande en ligne. Contactez-nous pour connaître sa disponibilité et obtenir un devis.