Aller au contenu

Astralpool - Socle pour filtre à sable Norma Ø 1 200 mm - 08145R0150

Astralpool 08145R0150
Certifié Certifié boutique en ligne
Retours faciles Retours faciles dans les 14 jours
Pièce de rechange Vous cherchez une pièce de rechange ?
Aller à la vue éclatée
Question Cherchez-vous des conseils ?
Posez votre question

Astralpool – Filter Base for Norma Sand Filter Ø 1200 mm

This is the genuine OEM filter base for the AstralPool Norma laminated sand filter in the Ø 1,200 mm diameter size (parent unit SKU 08145). Sitting at position 18 in the official Fluidra exploded-view diagram, it forms the lower structural foundation of the filter vessel, supporting the tank body and its internal collector assembly above the installation pad. Replacing a cracked, worn, or damaged base restores the mechanical integrity and correct positioning of the entire filter unit.

Compatibilité

This base is designed exclusively for the AstralPool Norma Filters D. 1000–1200 series (parent SKU 08145), which is the Ø 1,200 mm variant rated at 34,000 l/h. It is not interchangeable with smaller Norma diameters (Ø 650, Ø 800) or with other AstralPool filter ranges such as the Delta, Aster, or Berlin series. Always cross-reference the exploded-view position (18) and parent SKU before ordering.

Pourquoi l'authenticité est importante

The Norma filter is a laminated polyester-fibreglass (PRFV) vessel rated to a maximum working pressure of 2.5 kg/cm² and built to comply with DIN standard 19643/19605. A genuine Astralpool base is engineered to match these exact tolerances, ensuring the vessel remains level and stable under full operating pressure. Aftermarket alternatives may not replicate the correct footprint or load-bearing geometry, risking vessel misalignment or seal failure.

Installation

The filter base is a structural component and its replacement typically requires draining and partially dismantling the filter vessel. Professional installation by a qualified pool technician is strongly recommended to ensure correct seating, torque on any fasteners, and a leak-free restart. Consult the official Fluidra parts diagram for the Norma D. 1000–1200 (08145) to confirm all associated hardware is in serviceable condition before refitting.

Cette pièce n'est actuellement pas disponible à la commande en ligne. Contactez-nous pour connaître sa disponibilité et obtenir un devis.

Informations complémentaires

Modèle de filtre compatible : AstralPool Norma Sand Filter Ø 1200 mm (SKU 08145)
Série de filtres : Norma D. 1000–1200
Position sur la vue éclatée : 18
Pression de service maximale du filtre : 2,5 kg/cm²
Filter Capacity (Parent Unit): 34,000 l/h
Conformité aux normes : DIN 19643 / 19605

Cette pièce de rechange est compatible avec :