Purpose-built for 15 mm press systems, this 90\u00b0 elbow from Bonfix delivers a precise right-angle change of direction in a single tool press \u2014 no soldering, no open flame, no hot-work permits required. Manufactured in grade 316L stainless steel, it offers enhanced resistance to chloride-rich environments, making it well suited to pool plant rooms and poolside pipework where aggressive water chemistry is a constant factor.<\/p>\n
Grade 316L stainless steel carries a lower carbon content than standard 316, reducing the risk of sensitisation at weld zones and delivering superior resistance to chlorides and chemically treated water. This makes the fitting a durable long-term choice in pool and spa installations as well as potable water systems, where material integrity over decades is essential.<\/p>\n
The fitting holds KIWA and DVGW certification, confirming its suitability for Dutch and German drinking water installations and meeting the rigorous European standards expected by professional installers and inspectors. For pool plant rooms supplied via a potable water feed, this certification provides the compliance documentation that installers and building inspectors require.<\/p>\n
The press-fit end eliminates the need for soldering or threading on site. A standard press tool crimps the fitting permanently onto compatible 15 mm stainless steel pipe, producing a leak-tight, mechanically secure joint in seconds. This significantly reduces installation time on multi-fitting runs and removes fire-risk concerns associated with brazing in enclosed pool plant rooms.<\/p>","protected":false},"excerpt":{"rendered":"