Rated to 30 bar and 120 \u00b0C, this 1\u00bc” male-thread-to-40 mm hose tail adaptor from Profec bridges the gap between a threaded port and a flexible hose in pool plant rooms, pump installations, and industrial pipework. At 60 mm in overall length, it is compact enough for confined equipment bays while delivering a full-bore flow path suited to the larger hose diameters common on pool circulation and heat-pump circuits. The hexagonal body (spanner size 42) allows precise torqueing without slippage.<\/p>\n
Machined from solid brass, this adaptor resists corrosion in chemically treated pool environments and handles continuous working pressures up to 30 bar \u2014 well above the typical 2\u20134 bar found in pool circulation systems, making it equally at home in higher-pressure dosing or heating applications. The 120 \u00b0C temperature rating accommodates heat-pump and solar-heating return lines without degradation of the fitting body.<\/p>\n
One end presents a 1\u00bc” male BSP thread that mates with any standard 1\u00bc” female BSP port on pumps, valves, filters, or manifolds. The opposite end is a 40 mm barbed hose tail, sized to accept 40 mm internal-diameter flexible hose securely when fitted with an appropriate hose clamp. PTFE tape on the thread is recommended for a leak-free seal.<\/p>\n
The 42 mm spanner flat makes for straightforward installation even in tight spaces, and the fitting is compatible with PVC, rubber, and reinforced flexible hoses commonly used in European pool plant rooms. Its rated performance characteristics mean it can serve as a direct replacement or upgrade fitting wherever a 1\u00bc” threaded outlet must terminate into a 40 mm flexible hose run.<\/p>","protected":false},"excerpt":{"rendered":"