This is a genuine Davey service motor kit (part number KSLL150) designed to overhaul the motor assembly on older-generation Davey Silensor and SilensorPro swimming pool pumps \u2014 specifically models SLS100E, SLS150E, and SLL150E that were manufactured without a splined groove on the shaft. Supplied complete with a new shaft and impeller, it brings the pump’s rotating assembly up to the current specification in a single service operation. It is the correct replacement when the motor or its associated rotating components have failed, worn beyond acceptable limits, or require scheduled overhaul.<\/p>\n
This kit fits old-generation Davey Silensor pumps \u2014 models SLS100E (1.0 HP), SLS150E (1.2 HP), and SLL150E \u2014 identified by the absence of a splined groove on the motor shaft. It is not intended for current-generation pumps that feature a splined shaft. If you are unsure which generation your pump belongs to, check the shaft profile or consult your Davey service records before ordering.<\/p>\n
Because the old-generation shaft and impeller must be replaced together when fitting a new motor end shield, Davey supplies this kit with a matched new shaft and impeller already included. This ensures correct hydraulic balance, proper mechanical fit, and full restoration of pump performance \u2014 eliminating the risk of mismatched components that can cause premature wear or vibration in the Silensor’s patented water-cooled motor assembly.<\/p>\n
Motor kit replacement on Davey Silensor pumps requires Davey service tools (13810SP and 13810-1SP) to remove the case nuts, and should be carried out by a qualified pool technician or an authorised Davey service centre. Isolate and de-energise the pump fully before beginning any disassembly, and refer to the official Davey Silensor Servicing Instructions for the correct procedure.<\/p>","protected":false},"excerpt":{"rendered":"