Módulo de control de batería Bluetooth Rain Bird ESP-BAT-BT para 1 estación
Envíos 1-3 semanas
Certificado tienda en línea
Devoluciones fáciles dentro de 14 días
¿Buscas consejo?
Rain Bird ESP-BAT-BT Bluetooth Battery-Powered Irrigation Control Module
The Rain Bird ESP-BAT-BT is a compact, battery-operated Bluetooth control module designed for wire-free irrigation scheduling in gardens, sports fields, and greenhouse installations. Powered by 4 x AA batteries, it delivers reliable valve activation without the need for mains electricity or a central controller, making it ideal for remote beds, roadside verges, and any zone where cabling is impractical.
Scheduling and manual activation are handled entirely through the Rain Bird mobile app via Bluetooth, eliminating the need for a separate programmer box at the installation point. The IP68-rated enclosure protects all internal electronics against continuous immersion, so the module can be installed in underground valve boxes subject to flooding or heavy rain without risk of damage. The color-coded output wires (CM, stations 1–6, C, S, S terminals visible on the connector strip) allow straightforward field wiring to standard 24 V AC latching solenoid valves.
Especificaciones
- Model: ESP-BAT-BT
- Power supply: 4 x AA batteries (1.5 V alkaline recommended)
- Communication: Bluetooth (Rain Bird app, iOS and Android)
- Protección contra la entrada de agua y polvo: IP68
- Station outputs: 1 active station output (module supports up to 1 zone per unit)
- Output terminals: CM, 1–6 zone leads, C, S, S (sensor/common)
- Valve compatibility: 24 V AC latching solenoid valves
- Housing color: Dark grey
- Connector: Screw-cap waterproof cable gland (right-side entry)
- Dimensions: No labeled dimensions available on supplied image
Compatibilidad
The ESP-BAT-BT is compatible with Rain Bird 24 V AC latching solenoid valves. It is designed to integrate with the Rain Bird irrigation app on Bluetooth-enabled iOS and Android smartphones. It is not compatible with non-latching (continuous-current) solenoids or with Rain Bird’s ESP-TM2 / ESP-Me wired controller range. Sensor terminals (S, S) support a standard normally-closed rain or flow sensor.
Información adicional
| Marca: | Rain Bird |
|---|---|
| Modelo: | ESP-BAT-BT |
| Tipo de producto: | Bluetooth battery irrigation control module |
| Número de estaciones: | 1 |
| Fuente de alimentación: | 4 x AA batteries (1.5 V alkaline) |
| Communication protocol: | Bluetooth |
| App compatibility: | Rain Bird app (iOS and Android) |
| Protección contra la entrada de partículas y líquidos: | IP68 |
| Tensión de salida: | 24 V AC (latching solenoid) |
| Terminal strip: | CM, 1, 2, 3, 4, 5, 6, C, S, S |
| Sensor input: | Normally-closed rain or flow sensor |
| Housing color: | Dark grey |
| Cable entry: | Waterproof screw-cap gland, right-side |
| Labeled dimensions (DN/thread/mm): | None visible in supplied image |
En detalle
- No mains power required — 4 x AA batteries enable installation anywhere
- IP68 rated for continuous immersion, suitable for underground valve boxes
- Bluetooth app control removes need for a physical programmer at the valve
- Color-coded multi-wire connector simplifies field wiring identification
- Compact housing fits standard irrigation valve boxes
- Bluetooth range limits in-app control to smartphone proximity (typically ≤10 m through soil/covers)
- Battery life depends on zone frequency and valve load — requires periodic replacement
- No labeled physical dimensions available; verify box fit before ordering
