Manómetro de glicerina Profec de 63 mm, 0-16 bar, conexión inferior de 1/4" BSP
Envíos 1-3 semanas
Certificado tienda en línea
Devoluciones fáciles dentro de 14 días
¿Buscas consejo?
Profec 63 mm Glycerin-Filled Pressure Gauge – Bottom Connection 1/4″ Male Thread, 0–16 bar
This glycerin-filled pressure gauge from Profec delivers stable, easy-to-read pressure readings in pool filtration systems, irrigation networks, and greenhouse installations. The 63 mm stainless steel case houses a glycerin-dampened movement that suppresses pointer vibration caused by pump pulsation and water hammer, extending service life and improving legibility under dynamic flow conditions. The dual-scale dial displays readings in both bar and psi, covering a range from −1 to 16 bar (−15 to 232 psi), making it suitable for systems operating across a broad pressure range.
The bottom-entry 1/4″ BSP male thread fits standard gauge ports on filter housings, pump manifolds, pressure vessels, and irrigation control stations without adapters. The brass connection body ensures reliable sealing and corrosion resistance in water and mild chemical environments. The accuracy class of 1.6 % meets EN 837-1 requirements for process and utility monitoring, providing trustworthy readings for system commissioning and routine maintenance checks.
Especificaciones
- Marca: Profec
- Diámetro de la esfera: 63 mm
- Pressure range: 0 to 16 bar (0 to 232 psi)
- Rango de vacío: −1 bar (−15 psi)
- Doble escala: bar y psi
- Clase de precisión: 1.6 % (EN 837-1)
- Posición de conexión: inferior (radial)
- Rosca de conexión: 1/4″ BSP macho
- Connection material: Brass (copper alloy, applicable up to 40 bar)
- Bourdon tube material: Phosphorous bronze (for ranges from 60 bar; copper alloy up to 40 bar)
- Material de la caja: acero inoxidable
- Material de la ventana: policarbonato
- Líquido de relleno: glicerina
- Pointer: Black needle with red sub-scale indicator
Compatibilidad
Designed for direct installation into any 1/4″ BSP female gauge port. Compatible with pool filter housings, pump pressure ports, irrigation solenoid manifolds, drip-system pressure regulators, and pressure vessels fitted with standard 1/4″ gauge tappings. The glycerin fill makes it particularly well suited to pulsating systems driven by centrifugal or diaphragm pumps. Not intended for oxygen, acetylene, or aggressive chemical service.
Información adicional
| Marca: | Profec |
|---|---|
| Tipo de producto: | Manómetro relleno de glicerina |
| Diámetro de la esfera: | 63 mm |
| Rango de presión: | 0 – 16 bar |
| Vacuum indication: | −1 bar |
| Unidades de medida: | bar y psi (escala dual) |
| Clase de precisión: | 1.6 % (EN 837-1 Class 1.6) |
| Posición de conexión: | Bottom (radial / centre-back lower) |
| Rosca de conexión: | 1/4" BSP macho |
| Material de conexión: | Latón (aleación de cobre) |
| Material del tubo de Bourdon: | Phosphorous bronze (ranges ≥ 60 bar); copper alloy (ranges ≤ 40 bar) |
| Material del caso: | Acero inoxidable |
| Material de la ventana: | Policarbonato |
| Líquido de relleno: | Glicerina |
| Presión máxima de trabajo: | 16 bar |
| Temperatura de funcionamiento: | Not specified — indoor/ambient service |
En detalle
- Glycerin fill dampens pump pulsation, keeping the pointer steady and readable at a glance
- Dual bar/psi scale suits mixed professional and DIY environments
- Bottom-entry 1/4" BSP thread fits the vast majority of pool and irrigation gauge ports directly
- Stainless steel case resists corrosion in humid outdoor or plant-room conditions
- Accuracy class 1.6 % sufficient for system commissioning and pressure-loss diagnostics
- Fixed bottom-entry connection — not suitable where a back (axial) connection is required
- Glycerin fill may leak if case is cracked; gauge must be replaced rather than repaired
- 1/4" BSP thread requires a separate adapter for systems fitted with 1/2" or larger gauge ports
