Profec Brass Water Meter DN15 3/4" Male Thread 16 bar MID Pulse 24V
Envíos 1-3 semanas
Certificado tienda en línea
Devoluciones fáciles dentro de 14 días
¿Buscas consejo?
Profec Multi-Jet Brass Water Meter DN15 with Pulse Output – CE/MID Certified
This Profec horizontal multi-jet water meter in DN15 (3/4 inch male thread) is built for accurate, reliable volumetric measurement in cold-water supply lines up to 50 °C and 16 bar working pressure. The robust brass body with blue-coated housing houses a sealed, dry-dial register protected by a hinged blue lid, keeping the dial legible and condensation-free. MID approval (class MD-A / MD-AP) makes it legally compliant for billing and sub-metering applications across the EU.
The built-in pulse output option (24 V) allows straightforward integration with building management systems, irrigation controllers, or remote data loggers. Each pulse represents 10 litres, providing granular consumption data without the need for a separate add-on module. The horizontal installation orientation and standardised 165 mm or 190 mm face-to-face lengths ensure compatibility with common manifold and meter-box layouts used in residential, commercial, and greenhouse irrigation projects.
Especificaciones
- Marca: Profec
- Type: TL multi-jet, horizontal
- Diámetro nominal: DN15
- Connection: 3/4 inch male thread (BSP), both ends
- Face-to-face length: 165 mm / 190 mm (selectable)
- Installation height: 99 mm
- Dial centre height: 104 mm
- Body material: Brass (blue-coated)
- Presión máxima de trabajo: 16 bar
- Temperatura máxima del agua: 50 °C
- Maximum flow rate (Qmax): 3 m³/h
- Nominal flow rate (Qn / Q3): 1.5 m³/h
- Accuracy class: MD-A / MD-AP (MID R160)
- Pulse output value: 10 litres per pulse
- Pulse supply voltage: 24 V
- Certification: CE, MID (Measuring Instruments Directive)
- Register colour: Blue
- Register type: Dry-dial, sealed
Compatibilidad
Designed for horizontal installation in cold-water and irrigation pipework with 3/4 inch BSP male-threaded unions. The 165 mm and 190 mm face-to-face dimensions conform to EN ISO 4064 standard meter-box and manifold slots. The 24 V pulse output is compatible with standard irrigation controllers, pulse-counting data loggers, and BMS inputs that accept a reed-switch or open-collector pulse signal at 10 litres per pulse. Not suitable for hot-water or steam service above 50 °C.
Información adicional
| Marca: | Profec |
|---|---|
| Tipo de contador: | Multi-jet, horizontal (TL) |
| Diámetro nominal: | DN15 |
| Tipo de conexión: | Male thread 3/4 inch BSP, both ends |
| Longitud de la cara: | 165 mm / 190 mm |
| Altura: | 99 mm |
| Dial centre height: | 104 mm |
| Material del cuerpo: | Brass, blue-coated |
| Presión máxima de trabajo: | 16 bar |
| Maximum water temperature: | 50 °C |
| Caudal máximo (Qmáx): | 3 m³/h |
| Caudal nominal (Qn): | 1.5 m³/h |
| Clase de precisión: | MD-A / MD-AP |
| Pulse output value: | 10 litres per pulse |
| Pulse supply voltage: | 24 V |
| Register colour: | Azul |
| Tipo de registro: | Dry-dial, sealed |
| Certificación: | CE, MID (Directiva sobre instrumentos de medida) |
| Instrucciones de instalación: | Horizontal |
En detalle
- CE/MID certified (MD-A/MD-AP) – legally approved for billing and sub-metering without additional calibration
- Integrated 24 V pulse output (10 L/pulse) eliminates the need for a separate pulse module
- Dual face-to-face options (165 mm / 190 mm) fit the most common EU meter-box standards
- Brass body rated to 16 bar handles high-pressure mains supply without leakage risk
- Sealed dry-dial register with hinged lid stays legible in damp or underground installations
- Horizontal installation only – cannot be mounted vertically without a specific vertical-rated variant
- Limited to cold water up to 50 °C; not suitable for hot-water or heating circuits
- Pulse output requires an external 24 V supply and compatible controller – not self-powered
