Pressure Pipe PE40 32mm × 3.0mm Plain 5 bar Black 300m - 0700026
Pressure Pipe PE40 32mm × 3.0mm Plain 5 bar Black 300m
Supplied on a single 300 m coil, this 32 mm outside-diameter PE40 polyethylene pressure pipe carries a rated working pressure of 5 bar at up to 35 °C — making it a practical choice for pool circulation lines, backwash drainage runs, and underground supply pipework where UV exposure is not a concern. The 3.0 mm wall thickness gives a robust cross-section while keeping the pipe flexible enough to uncoil and route around plant-room obstacles without specialist equipment. Plain (non-socketed) ends suit compression fittings and electrofusion couplers in the standard 32 mm metric range.
Rendimiento en función del material y la presión
PE40 is a medium-density polyethylene grade well established in low-to-medium pressure water distribution. Rated at 5 bar continuous working pressure, this pipe handles the output of most residential and light-commercial pool pump and filter circuits with comfortable headroom. The all-black pigmentation provides inherent UV stabilisation for above-ground surface runs, while the smooth internal bore minimises friction losses across long pipe lengths.
Formato de bobinas y manipulación en la obra
The 300 m continuous coil eliminates mid-run joints on extended underground installations, reducing potential leak points and installation time considerably. Plain ends leave the jointing method entirely to the installer — compression fittings, push-fit couplers, or electrofusion sleeves all work with the standard 32 mm OD — giving full flexibility for new builds, renovation projects, and dealer/installer stock. The coil format is equally suited to irrigation, heating supply lines, and other low-pressure water circuits on the same site.
Temperature & chemical compatibility
With a maximum operating temperature of 35 °C, this pipe is suitable for unheated pool systems and cold-water supply runs but is not intended for solar-thermal or heat-pump primary circuits. PE40 is resistant to chlorinated water, common pool chemicals, and mild acids, making it a reliable long-term material for pool plant rooms and buried groundwork.
Información adicional
| Marca: | Sin marca |
|---|---|
| Presión: | 5 bar |
| Conexión: | sin formato |
| Temperatura máxima: | 35 °C |
| Material | Polietileno PE40 |
| Diámetro exterior: | 32 mm |
| Espesor de la pared: | 3,0 mm |
| Rated pressure: | 5 bar |
| Tipo de conexión: | Liso (extremos lisos) |
| Color: | Negro |
| Longitud de la bobina: | 300 m |
En detalle
- 300 m coil minimises mid-run joints on long installations
- 5 bar rating suits residential and light-commercial pool circuits
- UV-stabilised black pigmentation for above-ground runs
- Plain ends compatible with compression and electrofusion fittings
- Flexible PE40 grade is easy to uncoil and route on site
- 35 °C max temperature limits use to unheated cold-water circuits
- Large 300 m coil is bulky; requires adequate storage and handling space