Cable giratorio antienredos Maytronics Dolphin C6 de 1,2 m, modelo Dynamic - 9995792-DIY

Maytronics Dolphin C6 anti-tangle swivel cable 1.2 m Dynamic

This is the genuine Maytronics replacement anti-tangle swivel cable for the Dolphin C6 family, including the 2×2 and 2×2 C6 Plus Dynamic-range robotic pool cleaners. The integrated swivel joint rotates freely as the robot navigates the pool, preventing the cable from twisting and bunching — keeping cleaning cycles uninterrupted and the robot moving at full mobility. At 1.2 m, this short swivel cable section connects the robot body to the main cable run, acting as the dedicated anti-tangle interface at the critical flex point.

Funcionalidad y diseño

The swivel mechanism works by allowing continuous 360° rotation between the stationary cable run and the moving robot body. As the Dolphin C6 changes direction on floor, walls, and waterline, the swivel absorbs that rotational force rather than transmitting it up the cable. The DIY-style (Do-It-Yourself) plug design uses a pre-moulded motor-end connector, making installation a straightforward plug-and-play replacement without the need for a retrofit kit or internal wire threading.

Modelos Dolphin compatibles

This swivel cable assembly (9995792-DIY) is confirmed for the following Dolphin robots in the 2×2 and C6 Dynamic range: Dolphin 2×2, Dolphin 2×2 Gyro, Dolphin 2×2 115V, and Dolphin 2×2 C6 Plus. Always cross-check your robot’s serial number and existing cable plug type before ordering to ensure a correct match.

Síntomas que indican que es necesario un reemplazo

If the swivel joint has stiffened, seized, or no longer rotates freely, the cable will begin twisting with each cleaning cycle — reducing the robot’s range of movement, stressing the cable jacket, and eventually causing intermittent power loss or a complete short. Visible kinking at the swivel body, the robot pulling to one side, or the cable forming tight coils on the pool surface are all reliable indicators that this component has failed and must be replaced promptly.

Por qué es importante utilizar recambios originales de Maytronics

Aftermarket swivel cables may appear identical but frequently use inferior contact materials and spring-loaded connectors that fail within a single season, introducing resistance into the power circuit or losing electrical continuity altogether. A genuine Maytronics part is manufactured to the exact tolerances of the original, ensuring the swivel rotates freely under pool-water conditions, the jacket withstands chemical exposure, and the moulded plug seats securely in the motor port without risk of water ingress or premature burn-out.