Maytronics Dolphin 2x2 C6 motor clip - 21585R5028

Maytronics Dolphin 2×2 C6 motor clip

The Maytronics Dolphin 2×2 C6 motor clip is a small but critical retention component that secures the motor unit firmly in its housing inside the cleaner’s body. Without a correctly seated clip, the motor assembly can shift under the vibration and hydraulic forces of a cleaning cycle, leading to erratic movement, premature motor wear, or internal damage.

Function and importance

This clip acts as the primary mechanical fastener holding the motor unit in place within the Dolphin 2×2 C6 chassis. A failed or missing clip allows the motor to move out of its correct seat, disrupting drive transmission and potentially causing the cleaner to stall, veer off course, or stop climbing walls altogether.

Modelos Dolphin compatibles

This motor clip is designed for the Maytronics Dolphin 2×2 platform, covering the 2×2, 2×2 Gyro, and 2×2 C6 Plus variants. Always cross-check your robot’s model label before ordering to confirm fitment.

Cuándo hay que cambiarlo

Replace this clip if you notice the motor unit shifting or rattling inside the housing, if the cleaner moves erratically or lacks traction, or if during routine servicing the existing clip is found to be cracked, deformed, or no longer snapping securely into its retaining groove.

Por qué es importante que los productos de Maytronics sean originales

Counterfeit retention clips may appear dimensionally identical but are typically moulded from inferior polymers that creep or snap under pool-temperature cycling. A genuine Maytronics part is manufactured to the exact material spec and snap-force tolerance required to keep the motor unit locked throughout thousands of operating hours, protecting a far more expensive assembly downstream.