Saltar al contenido
Cuenta
0
0,00 €

Fluidra - Conexiones de Presión y Kit de Tubo para Filtro Europa Ø1050

4404170104
1-3 semanas
9,95 € Impuestos Inc.
Envíos Envíos 1-3 semanas
Certificado Certificado tienda en línea
Devoluciones fáciles Devoluciones fáciles dentro de 14 días
Repuesto ¿Buscas una pieza de repuesto?
Ir a vista explosionada
Pregunta ¿Buscas consejo?
Haz tu pregunta

Fluidra – Pressure Fittings and Tube Kit for Europe Filter Ø1050

This genuine Fluidra spare parts kit includes the pressure fittings and tube section required to maintain or restore the hydraulic connections on the Fluidra Europe Filter Ø1050-75MM commercial sand filter. The kit provides the correct pressure-rated PVC-U components to ensure leak-free, code-compliant plumbing between the filter vessel and the circulation system.

Compatibilidad

Designed specifically for the Fluidra Europe Filter Ø1050-75MM with a 1.0 m filter bed and a maximum working pressure of 2.5 kg/cm² (≈2.5 bar). This is a large-format commercial sand filter used in public pools, hotel pools, and high-demand aquatic facilities. Always verify your filter’s model reference before ordering to ensure correct fitment.

Por qué lo genuino importa

Fluidra genuine pressure fittings are manufactured to the same pressure ratings and dimensional tolerances as the original components, ensuring a reliable seal under continuous operating loads. Third-party substitutes may not match the exact bore, wall thickness, or connection standard of the original assembly, risking leaks or premature failure at pressure.

Instalación

Installation involves cutting out and replacing the existing tube section and fittings within the filter’s plumbing circuit. Solvent cement or PTFE thread-seal tape should be used as appropriate to the fitting type. Due to the commercial-grade nature of this filter, installation by a qualified pool technician is strongly recommended.

Información adicional

Producto compatible: Fluidra Europe Filter Ø1050-75MM, 1.0 m bed, 2.5 kg/cm²
Diámetro del depósito del filtro: Ø 1050 mm
Presión máxima de trabajo: 2,5 kg/cm² (≈2,5 bar)
Altura del lecho filtrante: 1,0 m
Tipo de pieza: Pressure fittings and tube kit
Aplicación: Commercial sand filter plumbing connection

Este repuesto es adecuado para: