Flotide/MEGA - Sensor de temperatura de entrada de agua TH6 con conector (6×4) - 7020263

Flotide/MEGA – Water Inlet Temperature Sensor TH6 with Plug (6×4)

This is the genuine Flotide/MEGA replacement water inlet temperature sensor (TH6) for the Flotide/MEGA Inverter heat pump range. Fitted at the water inlet of the heat pump, the TH6 sensor continuously monitors the temperature of pool water as it enters the unit, feeding real-time data to the control board so the heat pump can regulate its output accurately and efficiently.

Cómo funciona

The TH6 sensor is a plug-type temperature probe with a 6×4 mm connector that slots directly into the designated sensor port at the water inlet. It works alongside the water outlet sensor (TH5) and the ambient sensor (TH1) to give the control system a complete picture of operating conditions, enabling the inverter compressor to adjust its speed and heating output accordingly. A faulty or failed TH6 can trigger error codes and prevent the heat pump from operating correctly.

Compatibilidad

This sensor is a direct OEM spare part for the Flotide/MEGA Inverter Heat Pump Type Xp05Csie. If you are unsure whether this part matches your specific model, please check your heat pump’s spare parts diagram (the TH6 sensor is listed as item #39) or contact us before ordering.

Por qué lo genuino importa

Using a genuine Flotide/MEGA TH6 sensor ensures correct resistance characteristics and an exact plug fit, so the control board reads temperatures accurately. Non-genuine sensors with slightly different resistance curves can cause the unit to over- or under-heat, reduce efficiency, or generate persistent fault codes. A genuine part also helps maintain any remaining manufacturer warranty on your heat pump.