Flotide/MEGA - PVC-U Reducer Bush 63 mm × 50 mm Glue Spigot × Glue Socket 16 bar - 0110748

Flotide/MEGA – PVC-U Reducer Bush 63 mm × 50 mm Glue Spigot × Glue Socket 16 bar

This grey PVC-U reducer bush steps pipe runs down from 63 mm to 50 mm using a solvent-cement (glue spigot × glue socket) connection, rated to a maximum working pressure of 16 bar. It is designed for pool plant rooms, filtration pipework, and general pressure-pipe installations where a compact, leak-free diameter transition is needed.

Compatibilidad

Suitable for use with standard metric PVC-U pressure pipework. The spigot end glues directly into any DN63 socket fitting, while the integrated 50 mm socket accepts standard DN50 pipe or spigot fittings. Compatible with all common PVC solvent cements; solvent cement fittings conform to EN-ISO 1452-3.

Por qué lo genuino importa

Sourced as part of the Flotide/MEGA Technical Pallet Type Pro V2 range, this reducer bush is manufactured to consistent dimensional tolerances, ensuring a reliable solvent-weld joint and sustained pressure integrity at 16 bar. PVC-U construction offers excellent chemical resistance to acids, alkalis, salts, and water-mixed solvents, making it well suited to chlorinated pool water environments.

Instalación

Clean and deburr both pipe ends before applying PVC primer/cleaner, then solvent cement. Insert the spigot end into the receiving DN63 socket and push the DN50 pipe or fitting firmly into the bush socket, holding briefly until the joint sets. No specialist tools are required beyond standard pipe cutters and cement applicators.