Profec Ultrasonic Water Meter DN15 3/4" Male Thread 16 bar 24VDC MID Class 2
Envíos 1-3 semanas
Certificado tienda en línea
Devoluciones fáciles dentro de 14 días
¿Buscas consejo?
Profec Ultrasonic Water Meter DN15 – Accurate, MID-Approved Flow Measurement for Pool and Irrigation Systems
This Profec ultrasonic water meter offers highly accurate, non-mechanical flow measurement for domestic and light commercial water circuits. Operating on the proven ultrasonic transit-time principle, it contains no moving parts, eliminating wear-related drift and reducing maintenance intervals significantly. The compact brass body with 3/4 inch male thread connections fits directly into standard pipe assemblies without adapters, making it an efficient choice for pool plant rooms, greenhouse irrigation headers, and building water sub-metering installations.
The meter carries full MID (Measuring Instruments Directive) approval under certificate RO-2275-16379, accuracy Class 2, making it legally suitable for billing and custody-transfer applications across EU member states. The white ABS housing is rated IP68, meaning the electronics and display remain protected during temporary submersion — an important feature for outdoor or below-ground meter-pit installations. The backlit LCD shows cumulative volume in m³, and the RS485 output with 24 V DC supply enables direct integration into building management systems, irrigation controllers, and SCADA platforms.
Especificaciones
- Diámetro nominal: DN15
- Connection type: Male thread 3/4 inch (BSP)
- Nominal flow rate (Q3): 2.5 m³/h
- Flow ratio (R): R250
- Accuracy class: Class 2 (MID)
- MID certificate: RO-2275-16379 (M22 2275)
- Meter type: SC7
- Material del cuerpo: latón
- Housing colour: White
- Maximum admissible pressure (MAP): 16 bar
- Maximum differential pressure (Δp): 40 mbar
- Maximum operating temperature (T): 50 °C
- Resolución de temperatura: 0,1 °C
- Installation length: 165 mm
- Housing width: approx. 90 mm
- Power supply: 24 V DC
- Communication output: RS485
- Protection class: IP68
- Battery service life: 10 years (expire date stamped on unit)
- Measurement principle: Ultrasonic (no moving parts)
- Approvals: CE, MID Class 2, O/E1
Compatibilidad
The DN15 3/4 inch male thread connections are compatible with standard 3/4 inch female BSP fittings used in copper, brass, stainless-steel, and CPVC pipe systems. The 165 mm installation length matches the standard meter-replacement dimension common in European residential and light-commercial metering pits. The 24 V DC / RS485 interface is compatible with Modbus RTU-based controllers, including common irrigation management units and pool automation systems that accept RS485 input. Not suitable for hot-water systems above 50 °C or for compressed-air or gas measurement.
Información adicional
| Marca: | Profec |
|---|---|
| Tipo de contador: | SC7 Ultrasonic |
| Diámetro nominal: | DN15 |
| Tipo de conexión: | Male thread 3/4 inch BSP |
| Installation length: | 165 mm |
| Housing width: | 90 mm |
| Nominal flow rate Q3: | 2.5 m³/h |
| Flow ratio R: | R250 |
| Clase de precisión: | Class 2 (MID) |
| MID certificate number: | RO-2275-16379 |
| Maximum admissible pressure: | 16 bar |
| Maximum differential pressure: | 40 mbar |
| Temperatura máxima de funcionamiento: | 50 °C |
| Temperature resolution: | 0,1 °C |
| Fuente de alimentación: | 24 V CC |
| Communication output: | RS485 |
| Material del cuerpo: | Latón |
| Material de la carcasa: | ABS |
| Housing colour: | Blanco |
| Índice de protección: | IP68 |
| Battery service life: | 10 years |
| Pantalla: | LCD, cumulative volume in m³ |
| Principio de medición: | Ultrasonic transit-time |
| Autorizaciones: | CE, MID, O/E1 |
En detalle
- No moving parts — zero mechanical wear, long-term measurement stability without recalibration
- MID Class 2 certified (RO-2275-16379) — legally valid for billing and sub-metering in the EU
- IP68 housing — safe for outdoor meter pits and below-ground installations with risk of temporary flooding
- RS485 / 24 V DC output enables plug-and-play integration with Modbus RTU irrigation and BMS controllers
- 10-year battery life reduces service visits; production and expiry date stamped on the unit for easy audit
- One flow direction only — must be installed with correct orientation (inlet/outlet marked on body)
- Requires 24 V DC external power supply for RS485 communication; no pulse output variant in this configuration
- Maximum water temperature limited to 50 °C — not suitable for hot-water or heating circuits
