Profec Water Meter Brass Nickel 3/4" Male Thread 1.5m³/h 10bar 24V MID

Profec Single-Jet Hot Water Meter, 3/4 Inch Male Thread, DN15, MID-Certified

This Profec single-jet water meter is manufactured from nickel-plated brass and designed for accurate volumetric measurement of hot and cold domestic water supplies. With a nominal flow rate (Qn) of 1.5 m³/h and a maximum flow rate (Qmax) of 3 m³/h, it suits residential and light commercial installations including pool plant rooms, irrigation headers, and greenhouse water networks. The red-ringed body indicates hot-water service approval, covering temperatures from 2 °C up to 90 °C.

The meter uses a single-jet measuring principle — a reliable, low-maintenance design with no external strainer required for standard clean-water applications. The 24 V pulse output (class 0.1A, 1 pulse per litre) enables integration with building management systems, irrigation controllers, or remote data logging without mechanical reading. The sealed, tamper-evident register with a multi-digit totaliser and a x0.0001 m³ sub-dial provides at-a-glance consumption data on site.

Especificaciones

• Diámetro nominal: DN15
• Connection: 3/4 inch male thread (BSP), both ends
• Installation length (face-to-face): 110 mm
• Centre-to-port dimension: 77 mm
• Body height (approx.): 85 mm
• Body material: Brass, nickel-plated
• Measuring principle: Single-jet
• Nominal flow rate (Qn): 1.5 m³/h
• Maximum flow rate (Qmax): 3 m³/h
• Working pressure (MAP): 10 bar
• Water temperature range: 2 °C – 90 °C
• Pulse output voltage: 24 V
• Pulse value: 0.1 A (1 pulse per litre, class 0.1A)
• Display: Multi-digit roller totaliser, sub-dial x0.0001 m³
• Approvals: CE, MID (Measuring Instruments Directive 2014/32/EU)
• Application: Hot water (red ring indicator)

Compatibilidad

Designed to fit any 3/4 inch BSP male-threaded pipe system with a 110 mm installation length. Direct replacement for MID-compliant DN15 single-jet meters in domestic hot-water, pool plant, or irrigation metering positions. The 24 V pulse output is compatible with standard pulse-counting BMS inputs, irrigation schedulers, and data loggers that accept a 24 V dry or active pulse signal at class 0.1A resolution.