AstralPool - Manifold Arm Assembly 1" 265 mm Fibre – Vesubio Filter - 4404010392

AstralPool – Manifold Arm Assembly 1″ 265 mm Fibre – Vesubio Filter

This is the genuine AstralPool replacement manifold arm assembly for the Vesubio fibre-glass sand filter range. The 1-inch, 265 mm lateral arm slots into the central manifold collector inside the filter tank, drawing filtered water evenly through the sand bed and directing it to the outlet. Replacing a cracked or missing arm restores full filtration efficiency and prevents unfiltered water from bypassing the sand media.

Compatibilidad

This arm is designed specifically for the AstralPool Vesubio Filter range in diameters D.500, D.600, D.750, D.900, D.1050, and D.1200 (parent assembly SKU 16574FP191). It corresponds to position 13 in the official Fluidra exploded view for these filters. The Vesubio range covers both private and commercial pool installations, so this part is relevant to a wide variety of sites. Always cross-reference your filter’s exploded diagram before ordering to confirm the correct arm length is required.

Genuine AstralPool Quality

Manufactured to AstralPool’s original specifications, this arm is constructed from fibre-reinforced material to withstand continuous immersion and the chemical environment of pool water. Using a genuine Fluidra/AstralPool spare ensures dimensional accuracy for a secure, leak-free fit in the manifold hub, and maintains the filter’s rated maximum working pressure of 2.5 bar. Non-genuine alternatives may differ in length or thread pitch, leading to poor seating and reduced filtration performance.

Instalación

The manifold arm assembly threads directly into the central collector pipe of the Vesubio filter. Servicing the internal manifold requires draining the filter tank and removing the top lid before the arm can be accessed and replaced. We recommend having the full exploded view (position 13) to hand during installation; if in doubt, a qualified pool technician should carry out the work.