Saltar al contenido

Water-ID - PoolLab 2.0 Replacement Filter Papers 0.45 Micron 25mm (Pack of 50) - PLSp-Filt45M

Water-ID PLSp-Filt45M
1-3 semanas
98,45  Impuestos Inc.
Envíos Envíos 1-3 semanas
Certificado Certificado tienda en línea
Devoluciones fáciles Devoluciones fáciles dentro de 14 días
Pregunta ¿Buscas consejo?
Haz tu pregunta

Water-ID – PoolLab 2.0 Replacement Filter Papers 0.45 Micron 25mm (Pack of 50)

These genuine Water-ID 25 mm, 0.45 micron membrane filter papers are consumable accessories for the PoolLab 2.0 photometer. Loaded into the dedicated filter paper adapter, they remove fine suspended particles from your water sample before it reaches the photometer’s measuring chamber — a mandatory preparation step for certain parameter tests. Each plastic can contains 50 individual filter papers, providing a reliable supply for ongoing professional or high-frequency pool and spa water testing.

What They Do and Why It Matters

For parameters such as Phosphate (HR) and Nitrate, the PoolLab 2.0 measurement protocol requires the water sample to be pushed through a filter paper before analysis. Suspended particles in unfiltered pool water scatter light inside the photometer and cause erroneously high readings, undermining the accuracy of your results. The 0.45 micron pore size captures fine turbidity and microparticulates, delivering a clarified sample that allows the photometer’s LED optics to read colour changes cleanly and produce trustworthy data.

Compatibilidad

These filter papers are designed exclusively for use with the Water-ID PoolLab 2.0 photometer and its filter paper adapter accessory (PLSp-Filtad1). They are not compatible with the older PoolLab 1.0, which uses a different accessory system. Always pair them with the correct Luer lock syringe and filter adapter to complete the filtration workflow correctly.

Cuándo hay que cambiarlo

Each filter paper is intended for single use — discard it after every individual filtration step to prevent cross-contamination between samples and to maintain consistent, photometer-grade accuracy. With 50 papers per can, this pack suits busy pool technicians or testing facilities that run frequent Phosphate HR or Nitrate measurements. Replace the can whenever stock runs low so the filtration step is never skipped due to unavailability.

Información adicional

Dispositivos compatibles: Water-ID PoolLab 2.0 Photometer (not compatible with PoolLab 1.0)
Filter Diameter: 25 mm
Pore Size: 0.45 micron
Tamaño del envase: 50 filter papers per can
Intended Tests: Phosphate HR, Nitrate (and any PoolLab 2.0 method requiring sample filtration)
Usage: Single-use — one paper per filtration step

En detalle

  • Removes fine particles for accurate photometer readings
  • 50 papers per can — great value for regular testing
  • Correct 25 mm diameter fits PoolLab 2.0 adapter perfectly
  • Single-use design eliminates cross-contamination risk
  • Genuine Water-ID quality matched to photometer specifications
  • Compatible with PoolLab 2.0 only — not for PoolLab 1.0
  • Requires separate filter adapter and Luer lock syringe to use