Profec PVC-U Pressure Pipe 50mm x 3.7mm Plain PN16 Grey 4m KIWA
Zertifiziert Online-Shop
Einfache Rückgaben innerhalb von 14 Tage
Suchen Sie Rat?
PVC-U Pressure Pipe 50 mm PN16 – Plain-End, KIWA-Certified, 4 m Length
This grey PVC-U pressure pipe offers a reliable, corrosion-free solution for pool circulation systems, irrigation mainlines, and industrial fluid transport. With an outside diameter of 50 mm and a wall thickness of 3.7 mm, it conforms to the ISO metric pressure-pipe series and is rated to PN16 (16 bar at 20 °C), making it suitable for demanding cold-water pressure applications where strength and long service life are essential.
Both pipe ends are plain (spigot), ready for solvent-cement socket fittings or mechanical compression couplings in the same nominal size. The smooth internal bore minimises friction losses across the 4-metre length, contributing to energy-efficient pump operation. The grey colour and UV-stabilised PVC-U compound resist sunlight degradation when installed above ground, while the material’s inherent chemical resistance makes it compatible with chlorinated pool water, fertiliser solutions, and most common irrigation additives.
Technische Daten
- Material: PVC-U (unplasticised polyvinyl chloride)
- Outside diameter: 50 mm
- Wall thickness: 3.7 mm
- Inside diameter (approx.): 42.6 mm
- Nominal pressure rating: PN16 (16 bar at 20 °C)
- Pipe series: ISO-PN16
- End type: Plain (spigot) both ends
- Length: 4 m
- Farbe: Grau
- Certification: KIWA
- Standard: ISO 1452 / EN ISO 15493
Kompatibilität
Designed for use with 50 mm PVC-U solvent-cement socket fittings (elbows, tees, reducers, couplings) and 50 mm mechanical compression fittings rated to PN16 or higher. Suitable for cold potable water, pool and spa circulation, greenhouse irrigation networks, and general industrial water distribution. Not recommended for hot-water systems above 45 °C or for conveyance of solvents or concentrated acids.
Zusätzliche Informationen
| Marke: | Profec |
|---|---|
| Material: | PVC-U |
| Outside diameter: | 50 mm |
| Wandstärke: | 3.7 mm |
| Inside diameter: | 42.6 mm |
| Nominal pressure rating: | PN16 |
| Max. working pressure at 20 °C: | 16 bar |
| Pipe standard: | ISO-PN16 (ISO 1452 / EN ISO 15493) |
| Endtyp: | Plain (spigot) both ends |
| Länge: | 4 m |
| Farbe | Grau |
| Zertifizierung: | KIWA |
| Anwendung: | Cold water pressure systems, pool circulation, irrigation |
Im Detail
- KIWA-certified PN16 rating provides a generous safety margin for pool and irrigation pressure systems
- Plain spigot ends accept both solvent-cement and compression fittings for installation flexibility
- Smooth bore reduces head loss and improves pump efficiency over long pipe runs
- Corrosion-free PVC-U body eliminates rust contamination in pool or potable water circuits
- 4 m stick length minimises joints, reducing potential leak points on straight runs
- Solvent-cement joints require cure time before pressurising — plan for adequate setting period
- Pressure rating de-rates significantly above 20 °C; not suitable for hot-water applications
- Plain-end pipe requires separate fittings; no integrated socket or thread supplied
