Druckrohr PE40 20 mm × 2,2 mm glatt, 6 bar, schwarz – 100-m-Rolle – 0700007
Pressure Pipe PE40 20mm × 2.2mm Plain 6 Bar Black – 100m Coil
Supplied as a full 100-metre coil, this 20 mm outside-diameter PE40 pressure pipe carries a 6 bar working pressure rating at up to 35 °C, making it a practical choice for pool plant-room supply lines, backwash drainage runs, and general poolside water-management pipework. With a 2.2 mm wall thickness and plain (unjointed) ends, it is ready to cut to length and connect using standard compression fittings sized for 20 mm PE pipe.
Material & pressure characteristics
PE40 is a medium-density polyethylene grade offering a balanced combination of flexibility and tensile strength. The 6 bar pressure rating covers the working pressures encountered in residential pool filtration and circulation systems, while the smooth internal bore minimises friction losses along long pipe runs. The black colouring provides inherent UV stabilisation, keeping the pipe suitable for exposed or partially buried outdoor installations.
Coil length & plain-end connection
The 100-metre coil length is ideal for installers and dealers who need to cut multiple runs from a single stock item, reducing waste and connection points. Plain ends are compatible with the widest range of compression and push-fit fittings for 20 mm PE pipe, giving flexibility across different fitting brands on site. No solvent cement or heat tools are required for standard compression joints, simplifying installation in confined plant rooms.
Pool & poolside applications
At 20 mm diameter, this pipe suits secondary feed lines, chemical dosing supply runs, and make-up water connections around pool plant rooms. The 35 °C maximum temperature limit means it is well suited to unheated or ambient supply lines; for hot-side heat-pump or heater connections, a higher-rated pipe material should be specified. Its corrosion-free polyethylene construction requires no protective coating and will not scale or pit in contact with treated pool water.
Zusätzliche Informationen
| Marke: | Ohne Markenzeichen |
|---|---|
| Druck: | 6 bar |
| Verbindung: | einfach |
| Max. Temperatur: | 35 °C |
| Material: | PE40 (Polyethylen mittlerer Dichte) |
| Außendurchmesser: | 20 mm |
| Wandstärke: | 2,2 mm |
| Max. Betriebsdruck: | 6 bar |
| Endtyp: | Einfach (ohne Gelenke) |
| Farbe | Schwarz (UV-stabilisiert) |
| Spulenlänge: | 100 m |
Im Detail
- Full 100m coil – stock one item, cut multiple runs
- 6 bar rated – suits residential pool circulation pressures
- Plain ends fit standard 20mm compression or push-fit fittings
- Black PE40 construction is corrosion- and scale-free
- Flexible coil format easy to handle and route on site
- 35 °C max – not suitable for hot-side heater connections
- 20mm diameter limits flow; larger pools need wider pipe