Norsup Uv Supernova – Explosionszeichnung und Ersatzteile

Norsup UV Supernova exploded view & spare parts

This page covers the complete exploded-view diagram and bill of materials for the Norsup UV Supernova UV-C disinfection unit, factory reference 7025376. The diagram includes all thirteen numbered positions — from the amalgam lamp and quartz glass sleeve through to the pipe fittings and closure hardware — giving you a precise map of every serviceable component on the unit. The Norsup Supernova family installs in-line on 50/63 mm pipework and is designed to work across chlorine-based, salt-based, and bio pool systems alike, so the same housing and fitting architecture applies whether you own the standard Supernova or the Timer variant. Locate your position number in the diagram and you should be able to identify the exact part you need within minutes.

So finden Sie Ihr Teil mithilfe der nummerierten Abbildung

Every numbered call-out printed on the diagram corresponds directly to a row in the parts list below, so start by deciding which area of the unit has failed or worn — lamp chamber, plumbing connections, seals, or electrical section. Once you have narrowed the area, find the relevant position number on the diagram, then match that number to the same position column in the table to retrieve the part description and SKU. Note that some positions in this diagram carry a letter suffix — for example 1a, 2a, 4a, 5a, und 10a — which indicates that only one specific variant of that component is listed for this 80 W configuration; if Norsup ever extends the range, additional variants (1b, 2b, and so on) would appear here as separate rows. Positions without a letter suffix — such as 3, 6, 7, 8, 9, 11, 12, und 13 — apply universally across the Supernova range covered by this diagram. Pay close attention to positions listed as sets: position 6 is a set of two union couplers and position 7 is a set of two O-rings, so ordering one line item gives you the complete pair. Where a position shows no SKU, the part is either supplied as part of a larger assembly or is not currently available as a standalone item — contact us before ordering if you are unsure. Always cross-reference the part description as well as the position number, since some fasteners and seals look similar across different Norsup product families.

Main replaceable assemblies on the Norsup UV Supernova

The Norsup UV Supernova is built around a sealed lamp chamber that houses the UV-C amalgam lamp (position 1a, SKU 7025380), chosen for its higher and more stable UV output compared with traditional UV-C lamps. Surrounding the lamp is the quartz glass sleeve (position 2a, SKU 7025562), dimensioned at 933 × 25 mm for the 80 W build; this sleeve transmits UV-C radiation into the water flow while isolating the lamp from direct contact with pool water. The sleeve is sealed at both ends by a set of O-rings (position 3), which should always be inspected and replaced whenever the quartz glass is removed. The electrical and control section — including the UV-C safety switch — is covered by position 4a (SKU 7025564), which carries the integrated safety interlock referenced as item 4.1 in the factory documentation. The outer body of the unit is the housing (position 5a, SKU 7028713), which on this variant accommodates the timer electronics and LED lamp-status display. On the plumbing side, the unit connects to the pipe circuit via a pair of 2/3 union couplers (position 6, SKU 7028715), each sealed with its own dedicated O-ring (position 7, SKU 7028716). Where the pipework transitions from 63 mm to 50 mm or 1½ ” female thread, the short reducer (position 8, SKU 7028717) handles that step-down, while the long reducer (position 13, SKU 7028723) provides the 63 mm spigot-to-socket transition and incorporates the ¾ ” flow-switch connection point. The installation grip (position 9, SKU 7028718) at 75 mm assists with handling during fitting and removal. Finally, the lamp chamber end is sealed by the closure assembly comprising the 26 mm closure cap (position 10a, SKU 7028719), its threaded retaining nut (position 11, SKU 7028721), and an EPDM O-ring sized 59.99 × 2.62 mm (position 12, SKU 7028722).

Auswahl zwischen Varianten und Packungsgrößen

Several positions in this diagram use a lettered suffix to distinguish between variants: positions 1a, 2a, 4a, 5a, und 10a all carry the “a” designation, which in the Norsup Supernova range typically denotes the 80 W Timer specification covered by factory reference 7025376. If your unit is a different wattage or a non-timer model, the corresponding “b” or un-suffixed part may differ in physical dimensions, wattage rating, or connector type, so always verify your unit’s label before ordering. For the seal and O-ring positions, the dimensions given are critical: the closure O-ring at position 12 is specified as 59.99 × 2.62 mm EPDM — substituting a metric O-ring of nominally similar size but different cross-section will result in a poor seal under operating pressure. Positions 6 und 7 are each sold as sets of two pieces, which matches the two union couplers and two coupler O-rings required for a standard installation; ordering a single set therefore gives you everything needed for one complete connection at both the inlet and outlet.