Maytronics Dolphin C6 graue PVC-Bürste (CB) – 21585R9007

Maytronics Dolphin C6 grey PVC brush (CB)

This is the genuine Maytronics grey PVC combination brush (CB) designed for the Dolphin C6 commercial robotic pool cleaner. Mounted directly on the drive-roller tube, it simultaneously scrubs pool surfaces and channels debris toward the suction intake, delivering an efficient single-pass clean on floors, walls and the waterline.

Funktion und Design

The CB (combination brush) format integrates bristle and smooth-zone sections in one flexible PVC sheet that wraps around the brush roller tube. Interlocking tab-and-slot fasteners secure it firmly in place so it cannot shift or detach mid-cycle. The very flexible, rubber-like PVC compound provides consistent surface contact across flat and curved pool geometry without cracking under the continuous mechanical load of a commercial cleaning schedule.

Kompatible Dolphin-Modelle

This brush is the correct CB-type PVC replacement for the Dolphin C6 and Dolphin C6 Plus commercial robotic pool cleaners. The Dolphin C6 Plus carries four scrubbing brushes in a dual-drive configuration and cleans pools up to 121 feet in length; maintaining all four brushes in matched condition is critical for even traction and balanced suction across the extra-wide cleaning path.

Symptome, die darauf hindeuten, dass ein Austausch erforderlich ist

Dolphin brushes are high-wear consumables — they are in constant contact with the pool surface every cycle. Replace this brush when you notice: visible bristle wear or flattening; the robot losing traction or slipping on pool walls; reduced scrubbing performance leaving visible dirt lines; or a brush that no longer seats flat on the roller tube. On a heavy commercial schedule, inspect brushes at least once per season.

Warum Originalteile von Maytronics so wichtig sind

Genuine Maytronics PVC brushes are precision-manufactured to the exact durometer, tab spacing and roller diameter of the Dolphin C6 platform. Aftermarket alternatives frequently differ in PVC stiffness and tab geometry, causing poor fitment, uneven wear on the roller tube and degraded wall-climbing performance. Using a genuine part also keeps your robot within Maytronics warranty and service-centre eligibility.