Maytronics Dolphin 2x2 C6 Plus Netztransformator 220 W (ohne Kabel) – 9995677-ASSY

Maytronics Dolphin 2×2 C6 Plus power supply transformer 220W (without cable)

This is the genuine Maytronics 220W power supply transformer for the Dolphin 2×2 family of commercial robotic pool cleaners. It converts mains AC voltage to the low-voltage DC power required to drive the robot’s motors, control board and navigation systems. This EU-specification unit is supplied without a mains power cable.

Kompatible Dolphin-Modelle

This power supply is the correct replacement for the Dolphin 2×2, Dolphin 2×2 C6 Plus, Dolphin 2×2 Gyro and Dolphin Wave 120. The Dolphin C6 Plus is a dual-unit commercial cleaner that deploys two robots from a single power supply, making a fully functioning transformer essential to the operation of the entire system.

Function and role in the system

The power supply transformer is the heart of the Dolphin’s electrical system. It regulates the power delivered to both drive motors and the cleaning motor, and in the 2×2 architecture it simultaneously manages the output to two robot units. Without a correctly rated transformer the robots will not respond to commands, will clean erratically or will not operate at all.

Symptome, die darauf hindeuten, dass ein Austausch erforderlich ist

Common signs of a failing power supply include both robots failing to start, one or both units stopping mid-cycle, indicator LEDs on the power supply unit remaining unlit after power-on, or the unit becoming abnormally hot to the touch. If the cable and robot connections have already been checked and ruled out, the transformer unit itself is the next component to test and replace.

Warum sollten Sie sich für ein Originalteil von Maytronics entscheiden?

Third-party power supplies for commercial robotic cleaners are frequently underrated for continuous-duty use and may not deliver stable voltage across both output channels simultaneously. A genuine Maytronics transformer is engineered to the exact output profile of the 2×2 platform, protecting the motors, PCB and wiring harness from voltage irregularities that can cause premature failure and void the robot’s warranty.

Important note on cable

This unit is supplied without a mains power cable. If your existing cable is damaged or missing, a compatible replacement cable should be ordered separately. Re-using an undamaged original cable is recommended where possible.