Maytronics Dolphin 2x2 C6 Plus Motorhalterung – 9987601

Maytronics Dolphin 2×2 C6 Plus motor unit clip

This is the genuine Maytronics replacement clip that secures the motor unit within the Dolphin 2×2 series robotic pool cleaner. A small but structurally critical retention component, it holds the motor assembly firmly in position inside the robot’s body, preventing movement or vibration during operation. Without a fully intact clip, the motor unit can shift, leading to poor drive performance or premature wear on neighbouring components.

Kompatible Dolphin-Modelle

This clip is a direct OEM fit for the Dolphin 2×2, 2×2 Gyro, and 2×2 C6 Plus. If you are servicing any robot in the Dolphin 2×2 platform, this is the correct Maytronics part to use — cross-reference your model against this list before ordering.

Symptome, die darauf hindeuten, dass ein Austausch erforderlich ist

A cracked, deformed, or missing motor unit clip will typically manifest as an audible rattling from inside the robot body during cleaning cycles, erratic or reduced drive performance, or visible play in the motor unit when the robot is inspected with the lid removed. Do not run the robot with a failed clip, as the unsecured motor unit can cause secondary damage to the housing or drive train.

Warum sollten Sie sich für ein Originalteil von Maytronics entscheiden?

Maytronics engineers this clip to exact tolerances for the 2×2 motor bay geometry. Aftermarket alternatives frequently differ in wall thickness, polymer grade, or retention geometry, which can result in an insecure fit or premature failure in chemically treated pool water. Fitting a genuine part ensures the motor unit is held to the original specification and keeps your Maytronics warranty intact.

Installation note

The clip is a straightforward press-fit retention part and can be replaced without specialist tooling during routine motor unit maintenance. Always power down and disconnect the robot from its power supply before opening the chassis and working on internal components.