Flotide/MEGA – Abgastemperatursensor TH3 mit Stecker (6×4) – 7020261

Flotide/MEGA – Exhaust Temperature Sensor TH3 with Plug (6×4)

This is the genuine Flotide/MEGA replacement exhaust temperature sensor (TH3) with its pre-fitted 6×4 connector plug, designed for use in Flotide/MEGA Inverter pool heat pumps. Mounted on the compressor exhaust pipe, it continuously monitors the discharge gas temperature and feeds data to the heat pump’s control board to protect the compressor from dangerous overheating conditions.

Kompatibilität

This sensor is a named spare part for the Flotide/MEGA Inverter heat pump range, including the Xp05Csie series. It is identified as component TH3 in the official Flotide/Bevo parts catalogue and is designed to connect directly to the heat pump’s main control board via the factory 6×4 connector plug — no adapter or wiring modification required.

Warum Echtheit zählt

The TH3 sensor must deliver accurate discharge temperature readings so the control board can activate high-temperature protection, preventing compressor damage and lubricant breakdown. An incorrect or inferior replacement sensor can cause false shutdowns or, worse, allow the compressor to operate at unsafe temperatures — making an OEM part essential for reliable, safe operation.

Installation

The sensor replaces a like-for-like unit on the exhaust pipework of the refrigerant circuit. While the connector is plug-and-play, working on the refrigerant circuit of a heat pump requires a qualified HVAC/R technician. Always isolate the unit from power and follow local F-Gas regulations before carrying out any internal repairs.