Davey - EcoSalt 2 Reducing Bush (50x40 mm PVC) - 403393SP

Davey – EcoSalt 2 Reducing Bush (50×40 mm PVC)

This is the genuine Davey replacement reducing bush for the EcoSalt 2 salt chlorination system. A PVC fitting that steps down the 50 mm barrel union connection to 40 mm pipework, it is a standard installation component supplied with every EcoSalt 2 unit and is typically replaced when the original is lost, cracked, or damaged during a cell swap or plumbing modification.

Kompatibilität

Designed specifically for the Davey EcoSalt 2 range, covering all output variants: 15 g/h, 15 g/h Low Salt, 25 g/h, 25 g/h Low Salt, and 35 g/h models (DES2-15E, DES2-15EL, DES2-25E, DES2-25EL, DES2-35E and their EU equivalents). Suitable for both in-ground and above-ground residential pool installations. Always verify your model number before ordering.

Warum Echtheit wichtig ist

As an original Davey Water Products spare part, this reducing bush is manufactured to the exact material tolerances and thread specifications of the EcoSalt 2 system. Using a genuine part ensures a leak-free, pressure-rated connection at the cell inlet and outlet, protecting both the chlorinator and your pool plumbing investment.

Installation

The reducing bush threads directly into the 50 mm barrel union assembly, adapting it to 40 mm pipe runs. Solvent-weld or thread as appropriate to your installation. Two reducing bushes are typically required per EcoSalt 2 installation — one at each end of the electrolytic cell. Ensure pipework is de-pressurised and dry before fitting.