BWT Aquareva Skimmerklappen (2 Stück) – Anthrazit – 40031743

BWT Aquareva Skimmer Weirs Anthracite Grey – 40031743

The BWT Aquareva skimmer weirs anthracite grey 40031743 are original floating flaps for in-ground skimmers.
Supplied as a set of two in a dark anthracite grey colour, they restore correct surface skimming and give a modern, discreet look to the skimmer opening
wenn die ursprünglichen Klappen abgenutzt, kaputt oder verfärbt sind.

Key Features Of The BWT Aquareva Skimmer Weirs

• Original-BWT-Aquareva-Skimmer-Wehre, im Zweier-Set geliefert.
• Anthracite grey colour that matches contemporary coping stones and terrace finishes.
• Schwimmendes Klappendesign, das sich dem Wasserstand anpasst und so für eine effiziente Oberflächenabscheidung sorgt.
• Guides floating debris into the skimmer basket and limits the return of dirt to the pool.
• Designed as a direct replacement for skimmer weirs identified by reference 40031743.

Technical Details

• Marke: BWT Aquareva
• Produkttyp: Skimmerwehre (schwimmende Klappen)
• Manufacturer Reference: 40031743
• Farbe Anthracite grey
• Inhalt des Sets: 2 Skimmer-Wehre
• Einbauart: In-ground pool skimmers
• Typical Use: Replacement of original flaps for surface skimming
• Material: UV resistant plastic suitable for pool environments

Function And Role In The Skimming System

Das Skimmer-Wehr fungiert als schwimmendes Tor am Einlauf des Skimmers.
When the filtration pump is running, water flows over the upper edge of the flap and creates a thin surface current that captures leaves, insects and
other floating particles. When the pump stops, the flap rises to reduce backflow and helps keep collected debris inside the basket instead of returning to the pool.

• Bündelt den Wasserstrom an der Wasserlinie, um schwimmende Abfälle besser aufzufangen.
• Reduziert die Menge an aufgefangenem Schmutz, der bei Unterbrechung der Filterung wieder in den Pool gelangen kann.
• Contributes to stable water behaviour in the skimmer throat during operation.

Compatibility And Identification

These anthracite grey weirs are intended for skimmers that use the reference 40031743 in their spare parts list.
They are mounted at the front of the skimmer throat and pivot freely with the water level.
Before ordering, always compare the part number and the shape of your existing flap with the new weir set to ensure a correct match.

If your current skimmer weirs carry the same reference or your technical documentation specifies code 40031743, this set is suitable as a direct replacement.

When To Replace The Skimmer Weirs

Skimmer weirs are exposed to UV light, pool chemicals and constant movement.
With time the hinge area or side clips can weaken, the flap can warp, or the surface can become heavily discoloured, which reduces both performance and appearance.

• Replace the weirs if they no longer float correctly or fail to follow the water level smoothly.
• Ersetzen Sie die Wehre, wenn Scharnierstifte, seitliche Laschen oder aufsteckbare Teile Risse aufweisen oder gebrochen sind.
• Replace the weirs if they rub on the skimmer body or interfere with removal of the basket.
• Replace the weirs if the anthracite colour has become strongly faded, chalky or patchy.

Installation And Adjustment Guidelines

• Schalten Sie die Filterpumpe aus und nehmen Sie den Skimmerkorb heraus, um freien Zugang zur Klappe zu erhalten.
• Unclip the old weir from its hinge supports, following the procedure given in the skimmer documentation.
• Clean the hinge area and surrounding surfaces to remove scale, dirt and any sharp residues.
• Setzen Sie das neue BWT Aquareva-Skimmer-Wehr ein und rasten Sie die Scharnierstifte bzw. die seitlichen Laschen in die Halterungen ein.
• Check that the flap moves freely and naturally tilts slightly towards the pool side at rest.
• Reinstall the basket, restart filtration and observe the weir during a test run to confirm smooth movement and correct floating level.

With correctly adjusted anthracite grey weirs, the skimmer regains efficient surface cleaning and a modern, neutral appearance that coordinates with dark grey coping
and terrace finishes around the pool.