This page covers the genuine Davey ProGenius salt water chlorinator in both factory configurations: the DPG14<\/strong> and the DPG23<\/strong>. The DPG14 is rated for pools up to 70 m\u00b3, while the DPG23 handles pools up to 115 m\u00b3. Both models share the same overall architecture \u2014 a wall-mounted power supply housing the electronics, paired with a plumbed in-line electrolytic cell \u2014 and the exploded-view diagram on this page covers all nine numbered positions across both variants. Using the diagram alongside the parts list below, you should be able to identify the exact part you need within a few minutes.<\/p>\n Every numbered call-out on the diagram corresponds directly to a row in the parts list table below. Start by locating the area of the unit that concerns you \u2014 for example, the power supply enclosure, the plumbing connections, or the in-line cell \u2014 then find the position number printed next to that component in the diagram. Take that number to the parts list, where you will find the matching description and SKU ready to add to your basket. Be aware that several position numbers appear twice<\/strong> in the list, once for the DPG14 and once for the DPG23: positions 1, 2, 3, 4, 7, and 9 all have model-specific variants, so always confirm which factory reference (DPG14 or DPG23) applies to your unit before ordering. The quickest way to confirm your model is to check the label on the power supply enclosure, which will state either DPG14 or DPG23. Positions 5, 6, and 8 \u2014 the Timer, the Cell Cord Assembly, and the Flow Switch \u2014 are shared across both models, so there is only one SKU for each of those. If you are unsure whether a part is the shared or the model-specific variant, the description column in the parts list makes this explicit.<\/p>\n The ProGenius is organised into two principal sections: the power supply enclosure and the plumbed cell assembly. Position 1<\/strong> is the Power Supply itself (SKU DPG14PS<\/em> or DPG23PS<\/em>), the weatherproof wall-mounted unit that houses all the low-voltage electronics. The power supply should not be located within 3 metres of the pool water and must be hardwired into a suitable weatherproof outlet in accordance with local standards. Inside the enclosure, position 2<\/strong> is the Transformer (SKU 402771<\/em> for DPG14, 402772<\/em> for DPG23) and position 3<\/strong> is the PCB (SKU M112014<\/em> for DPG14, M112023<\/em> for DPG23), the main control board responsible for regulating chlorine output. Position 4<\/strong> is the Motor Protector (SKU 402677<\/em> or 402678<\/em>), which safeguards the circulation pump circuit. Position 5, the Timer (SKU 14275<\/em>), enables the chlorinator to run in step with the filter circulation pump. Position 6<\/strong> is the Cell Cord Assembly (SKU M2678-10<\/em>), the cable that carries power from the enclosure out to the in-line cell. In the plumbing section, position 7<\/strong> is the Barrel Union Assembly \u2014 the mechanical connection between the pipework and the cell body \u2014 and position 8<\/strong> is the Flow Switch (SKU 15712SP<\/em>). The ProGenius is supplied with a paddle-type flow switch, which is installed directly on the cell. Finally, position 9<\/strong> is the Replacement Cell (SKU DILC14REP<\/em> or DILC23REP<\/em>), a reverse-polarity in-line cell that benefits from regular monitoring to keep the chlorinator in the best possible condition.<\/p>\nCom utilitzar el diagrama numerat per trobar la teva pe\u00e7a<\/h3>\n
Main replaceable assemblies on the Davey ProGenius<\/h3>\n
Choosing between variants and pack sizes<\/h3>\n