This is the genuine OEM remote control holder (round, black) that clips onto the Dolphin 2×2 transport caddy and the Wave 150 caddy to retain the RCU 2010 remote control unit. It occupies position 28 on the Dolphin Supreme M5 caddy assembly schematic, keeping the remote securely docked on the caddy frame when the robot is out of the water or in storage.<\/p>\n
The holder provides a fixed, recessed mount for the RCU 2010 remote on the caddy upright. Without it, the remote has no secure resting point and is left loose on the pool deck, exposed to knocks, moisture, and UV. The round clip design locks the cylindrical remote body in place and releases cleanly with one hand.<\/p>\n
This holder is confirmed for the Dolphin 2×2 caddy and the Dolphin Wave 150 caddy. It is listed as a named spare on the Dolphin Supreme M5 parts schematic alongside the paired caddy adaptor for the PS 2010 power supply (part 9980038). If your caddy is a different generation or the universal caddy variant, verify the caddy model number before ordering.<\/p>\n
The holder is a plastic clip component and fails in predictable ways: the retaining ring cracks from repeated sun exposure, the snap tabs break if the remote is forced in at an angle, or the whole bracket snaps off the caddy upright after an impact. If the remote no longer sits securely in the caddy or the bracket is visibly cracked, replace this part rather than the entire caddy frame.<\/p>\n
Remove any remnants of the old holder from the caddy upright mounting point. Align the new holder with the moulded locating lugs on the caddy frame and press firmly until the retaining clips audibly snap into position. No tools are required. The remote control slides into the round recess from the top and is retained by the lip of the holder.<\/p>","protected":false},"excerpt":{"rendered":"