Sta-Rite Pump Base — 2.20 kW (RC479P)
Certificat botiga en línia
Devolucions fàcils dins 14 dies
Busques consell?
Pump base / mounting foot for the Sta-Rite HD pump range, rated for the 2.20 kW motor block. The base holds the motor + seal plate assembly at the correct height above the pool-room floor and dampens motor vibration so the pump runs quiet and the base bolts don’t work loose over time.
Order the matching kW/phase variant — the small (0.55 kW) motor block sits on a different mounting boss height and bolt pattern than the medium (1.10–1.50 kW) or large (2.20 kW) blocks. Getting the wrong base version forces the seal plate off-axis and shortens the mechanical seal life drastically.
Includes the vibration-isolating rubber pads at the mounting points. Genuine Sta-Rite / Pentair part — machined bolt boss lines up straight with the OEM motor. Replace when the base is cracked, when the vibration pads have hardened, or when a pump swap goes from one motor family to another.
Informació addicional
| Marca: | Sta-Rite (Pentair) |
|---|---|
| OEM reference: | RC479P |
| Compatible pumps: | 5P6R, SW5P6R |
| Rated power: | 2.20 kW |
En detall
- Matches the 2.20 kW motor block bolt pattern
- Genuine Sta-Rite / Pentair — bolt boss aligns straight with OEM motor
- Includes vibration dampening for a quieter pump room
- Not interchangeable across the full kW range — order the version that matches your pump
- Base only — mounting screws + silent blocks sold separately