Sta-Rite Motor Flange Bolt — 3/8-16 × 1" Stainless (RU354290SS / U30-74SS)
Certificat botiga en línia
Devolucions fàcils dins 14 dies
Busques consell?
Genuine Sta-Rite / Pentair motor-flange bolt — the hex-head cap screw that holds the motor bracket to the seal-plate flange on the Sta-Rite Swimtec and Max-E-Pro pump family. Equivalent OEM reference U30-74SS. Thread 3/8-16, length 1 inch, full stainless steel construction — the SS grade is the reason to swap the original zinc-plated fastener on any pump service.
Fits every Sta-Rite Swimtec 5P4R / SW5P4R / 5P6R / SW5P6R pump plus the wider Max-E-Glas II, Dura-Glas II, Dyna-Glas, Dyna-Jet TPE, Max-E-Pro, IntelliPro VS/VSF and IntelliFlo families that share the same 5-inch square motor flange. Four bolts per pump.
Standard service item: replace all four bolts at once during any seal-plate service. A single seized bolt during a future teardown wastes as much time as the entire seal job, so full stainless is cheap insurance. Torque hand-tight in a cross pattern — over-torque strips the seal-plate boss.
Informació addicional
| Marca: | Sta-Rite (Pentair) |
|---|---|
| OEM reference: | RU354290SS |
| Equivalent Pentair reference: | U30-74SS |
| Mida del fil: | 3/8-16 |
| Llargada: | 1 inch (25 mm) |
| Head type: | Hex head cap screw |
| Material: | Stainless steel (SS) |
| Compatible pumps: | SW5P4R, SW5P6R, 5P4R, 5P6R, Max-E-Glas II, Dura-Glas II, Dyna-Glas, Dyna-Jet TPE, Max-E-Pro, IntelliPro VS/VSF, IntelliFlo |
| Venut com a: | Single bolt (order 4 for a full seal-plate service) |
En detall
- 3/8-16 × 1" hex-head cap screw — direct OEM fit
- Full stainless steel — no more seized threads at next teardown
- Fits the entire Sta-Rite Swimtec + Max-E-Pro family
- Equivalent to Pentair U30-74SS
- Sold as single bolt — order 4 for a complete seal-plate service
- Hand-tighten in cross pattern — over-torque strips the plastic seal-plate boss