Hydro-Pro - Bloc de borns de bomba de calor 220–240 V / 32 A (16 mm²) - 7010527

Hydro-Pro – Heat Pump Terminal Block 220–240 V / 32 A (16 mm²)

This is the genuine Hydro-Pro replacement terminal block for the Hydro-Pro Heat Pump (Type 5), rated at 220–240 V and 32 A with a 16 mm² cable cross-section. It serves as the primary mains power connection point inside the heat pump, where the incoming supply cable is securely terminated to deliver electricity to the unit’s electrical circuit.

Compatibilitat

This terminal block is specifically designed for the Hydro-Pro Heat Pump Type 5 (single-phase, 220–240 V / 50 Hz). If you are unsure whether this part fits your exact model, please check your unit’s wiring diagram or service manual, or contact us before ordering — terminal blocks are model-specific and must match the unit’s rated current and cable sizing.

Per què l'autenticitat importa

An undersized or non-compliant terminal block poses a serious fire and safety risk in high-current heat pump applications. Using a genuine Hydro-Pro part ensures the connection point meets the exact current rating, cable clamping torque, and insulation standards required by the original equipment design, keeping your heat pump safe and warranty-compliant.

Instal·lació

Electrical work on pool heat pumps must be carried out by a qualified electrician. The supply voltage must be verified before connection, and the heat pump should be protected by a dedicated circuit breaker (slow-blow type, curve D) rated appropriately for the load. Always ensure a solid earth connection is maintained throughout the installation.