Flotide - E-Turbo Inverter pool pump 1.65 HP 50/63 mm ETV 165 - 7038483

Flotide – E-Turbo Inverter pool pump 1.65 HP 50/63 mm ETV 165

With a stepless speed range of 800–3,400 rpm and a flow output of 6–20 m³/h, the Flotide ETV 165 is sized for pools up to approximately 60 m³ and adapts its output continuously to match actual circulation demand. Running at under 50 dB, it is quiet enough for continuous 24/7 low-speed filtration without disturbing neighbours or garden users. The 1.65 HP fully inverted motor operates on single-phase 230 V AC and connects via 50/63 mm glue sockets, making it a straightforward retrofit into most European filter circuits.

Motor & energy performance

The E-Turbo’s fully inverted motor design decouples pump speed from mains frequency, allowing genuinely stepless adjustment rather than fixed-gear switching. Running at reduced speeds — for example, 1,500 rpm for gentle overnight filtration — the power draw drops dramatically compared with a single-speed equivalent, delivering significant seasonal energy savings without compromising water quality. The superior cooling system built into the motor housing sustains performance under continuous duty and extends operational lifespan.

Connectivity & control

An integrated Wi-Fi module and MODBUS/RS485 interface mean the ETV 165 can be managed remotely via smartphone app or wired into a BMS or home-automation system. The programmable controller — supplied with a detachable panel for flexible mounting — allows timed schedules, speed presets, and fault monitoring without the need for additional third-party hardware. A transparent 3-litre pre-filter basket provides a quick visual check on debris load without dismantling pipework.

Hydraulics & installation

The dual 50/63 mm glue connection accommodates the two most common European pipe standards, and the ABS/stainless-steel pump body paired with a polycarbonate impeller and EPDM shaft seal offers robust corrosion resistance in chlorinated or salt-water circuits. Maximum water temperature is 40 °C, covering heated pool applications comfortably. At 20 kg the unit is manageable for a two-person installation, though professional commissioning is recommended to validate electrical protection and hydraulic balance.